squiggie.com

Ok, so I’m posting two posts in the same day, sue me. I’ve got a little behind a little bit over the holiday season and am just now catching up.

Within the last couple weeks the house has started looking more like a home more than ever. They are almost done with the brick as well as completely done with the sheet rock and mud. As we speak, they are working on the trim and cabinets.

There isn’t much to say on the sheet rock other than we decided to round all the sheet rock corners. This is pretty standard now days and looks really nice as compared to your standard square edges. We’re not  doing any fancy wall texturing or anything. We are just sticking to the standard spackle and then the knockdown on the ceilings. We felt that texturing ages the house too quick. If you look at houses that have some cool texturing in them from 10 years ago, it doesn’t look so cool now. It actually dates the house. That was just our personal opinion (no offense meant to people that have 10 year old wall texturing in their house).

[View with PicLens]

12►

As far as the brick goes, we aren’t doing a whole lot there either. The whole house is going to be brick with a little stone work around the entry way. There will be some brick ledges under the windows and an outline around the front windows, but other than that, nothing special. We really like the brick color that we choose as it is the same brick that was on the last house my sister and brother-in-law had. It is a deep red with some darker black accents. We also chose to leave it unwashed so that the mortar stays on the bricks a little more and looks a little “sloppy”. I really like this look as it gives the brick texture.

Brick

Looking South

Looking West – The back of the house

Looking North

Hopefully they will finish up the brick this week or next and we will be able to see a completed exterior minus some lighting and finishing touches. Check back as this month will be jam packed with stuff. Hopefully this time next month, I’ll be posting about moving in!!!!!!!

Well again it has been too long between posts. I can’t believe how hard it is to stay on top of this from week to week. There have been a lot of exciting advancements in the house since the last post. We have since insulated, got all the sheet rock hung, taped and mudded as well the mason’s are vigorously working on getting the brick done.

Insulation
When we started this project, we agreed that we didn’t want to completely blow the budget on stupid things that didn’t matter like extravagant light fixtures or high prices flooring rather if we were going to go over, we wanted it to be on things that would have a payback. These things included any efficiency upgrades in the house appliances and house heating and cooling. Any house that is going to be efficient is going to have a tight wrap and a good insulation r-value. One of the many things that goes into insulating a house is the wall insulation. There are a number of choice to go with here but the most debated right now is whether or not to spend the extra money and get spray foam insulation or the more standard and less expensive fiberglass. The main difference between the two are cost and air dissipation. It is common sense that the way to make an efficient house is to keep the warm air inside in the winter and the cool air out and vice versa in the summer. Air dissipation is the enemy to efficiency. Spray foam tends to eliminate this because it can be sprayed in liquid form to seal all the holes and leaks in walls to the outside. It bonds to the wall and expands in every direction. Fiberglass insulation cannot seal the holes as well as foam can. It just simply doesn’t expand into the crevasses like spray foam will. Now, with that said, you can still achieve the same r-value with fiberglass as with foam, you just have to put more or thicker fiberglass insulation in the walls. There is also a theory that you can make a house too tight and it won’t be able to breath allowing for proper ventilation and circulation. The flip side to this decision is of course cost. You will be spending thousands more to do the entire house in spray foam insulation over traditional fiberglass. With that said, you need to compute your pay back period, or how long it will take you to pay back that extra cost with the saving you will realize in lower utility bills. In the end, the cost was too much for me. Conservative calculations place this payback period somewhere between 15 and 20 years. It would have cost approximately $2500 more to do spray foam insulation than fiberglass in our house. Even with a savings of $20 a month in utilities, which is a pretty high estimate, it would be around 10 years to pay that back. That is a pretty long payback period and ultimately was too  much for me. What we did opt to do was insulate the ceiling of the basement. This wasn’t too much more to do and it essentially separates the two levels and slows the dissipation of heat from the bottom level to the top. What that means is more of the heat stays in the basement when it is heating and the furnace doesn’t have to heat the basement near as much. I believe this was a good investment.

So without further delay, here are some pictures of the insulation.

[View with PicLens]